How to fix bios has been reset please decide how to continue

How to fix bios has been reset please decide how to continue. Sometimes it’s necessary to reset a computer, for example, after purchasing a used PC or when you’ve made changes to an existing system. In these cases, you should consider resetting the system settings. A so-called BIOS reset ensures that a computer runs on its factory settings. Similarly, power failures or newly installed hardware may make it necessary to restore a system to its original BIOS configuration. Even if you plan on selling your PC, a reset is recommended.

Method 1: Replace the CMOS battery

As for the Sata setting, preferably set sata to ahci instead of ide. Ahci increases read and write speeds dramatically, especially in SSDs. Keep in mind, if Windows was originally installed using ide and not ahci it may not boot and you will need to set it back to ide.

To correctly change from ide to ahci

Follow these steps carefully.

  1. Right-click the Windows Start Menu. Choose Command Prompt (Admin).
  2. Type this command and press ENTER: bcdedit /set {current} safeboot minimal
  3. Restart the computer and enter BIOS Setup (the key to press varies between systems).
  4. Change the SATA Operation mode to AHCI from either IDE or RAID (again, the language varies).
  5. Save changes and exit Setup and Windows will automatically boot to Safe Mode.
  6. Right-click the Windows Start Menu once more. Choose Command Prompt (Admin).
  7. Type this command and press ENTER: bcdedit /deletevalue {current} safeboot
  8. Reboot once more and Windows will automatically start with AHCI drivers enabled.
bios has been reset please decide how to continue
bios has been reset please decide how to continue

Reset the BIOS to Default Settings (BIOS)

  1. Access the BIOS Setup utility.See Accessing BIOS.
  2. Press the F9 key to automatically load the factory default settings.A message appears prompting you to continue this operation by selecting OK or to cancel the operation by selecting Cancel.
  3. Confirm the changes by highlighting OK, then press Enter.The BIOS Setup utility window appears with the cursor highlighting the first value on the window.
  4. To save the changes and exit the BIOS Setup utility, press the F10 key.

How to reset BIOS settings on Windows PCs

1. Reset internally from your device’s BIOS or UEFI menu

By far the most simple and non-technical method, resetting internally from your PC’s BIOS menu during bootup is also the safest and most consistent with the manufacturer’s intentions. It should be your preferred method unless you encounter difficulties starting up your computer or accessing the BIOS menu conventionally.
Pre-Windows 10 builds should look for instructions during bootup, with F2 providing access on most machines. Windows 10 users have several options, though the first is the easiest:
  • Hold down the shift key while you restart your computer
  • You should see a blue screen with advanced troubleshooting options
Or if you prefer, you can also do the following:

  • Navigate to the Settings tab under your Start menu by clicking the gear icon
  • Click the Update & Security option and select Recovery from the left sidebar
  • You should see a Restart now option below the Advanced Setup heading, click this whenever you’re ready
  • When your computer restarts, it should load a blue screen with advanced troubleshooting options
  • Select Troubleshoot and then click Advanced Options from the resulting options
  • Choose UEFI Firmware Settings and click Restart to continue
Your computer should shut off and then load a setup menu. This interface can vary in exact appearance and wording, but there should be several areas to find the reset default button.
Because the interface can vary, you may want to check multiple tabs for options, but be on the lookout for Configuration, Security, or Exit. Watch for phrases like “Load Setup Defaults” or “Load Default Options,” which should bring up a Yes or No dialog box. Select yes and your default settings should be restored. From here, simply exit and startup as usual.

2. Reset by removing and replacing the CMOS battery

The first of our more technical solutions involve removing and replacing the CMOS battery. Not every type of motherboard includes a CMOS battery, which provides a power supply so that motherboards can save BIOS settings. Bear in mind that when you remove and replace the CMOS battery, your BIOS will reset.
Here’s how to do it:
  • Turn off your PC’s power supply and remove all connections
  • Make sure you’re properly grounded to prevent damage to your computer
  • Access your computer’s interior, find the motherboard, and identify the CMOS battery. If you aren’t sure what this component looks like with your device, do some research into your specific model and specifications
  • Remove the battery, wait several minutes, and reattach the battery to your motherboard. You may want to replace it with a new battery, rather than simply reinserting the old one. To avoid damage, remember to take extreme caution removing the battery, particularly if it doesn’t detach easily

3. Clear and reset BIOS settings by clearing your motherboard jumper

Our final method for resetting your BIOS involves clearing your motherboard jumper, but it’s almost always limited in application to desktop PCs. It can also involve making fine adjustments to your motherboard, so you should take precautions before you start. You’ll definitely need to do some research beforehand as well.
First, you’ll need to check your owner’s manual or make sure you can successfully identify your motherboard jumper. They often look different, so familiarity with one or another type is not always a guarantee. Videos and guides are common, and manufacturers usually outline these procedures fairly clearly.
Next, you’ll follow the same safety procedures described above.

  • Start by disconnecting your computer’s power supply, unplugging all connections, and grounding everything
  • From here, follow the jumper-clearing instructions in the manual or online guide for your specific motherboard
You can often find them near your CMOS battery or by identifying a small plastic pin covering with associated language. But to avoid hiccups or settings problems, it’s crucial that you work from instructions tailored to your device.

Difference Between Clearing CMOS Through Battery Removal vs. Loading Optimized Defaults within the BIOS .They may just be the same thing…but they may not. It can most likely be different with different systems too.

CMOS is just a memory storage so you can think of it like a desk with pigeon holes for storing ‘stuff’ in. When BIOS needs to know which option to use for a particular setting it just pulls something from the pigeon hole that’s supposed to relate to the setting and uses what it finds in it without asking if it’s logical to the hardware installed or any other settings. When you change hardware or update a BIOS what used to be logical in the related pigeon hole may no longer be so you need to reset CMOS to force all settings to be logical with each other to allow it to at least start up in a BIOS screen whereupon you can do a ‘load optimized defaults’.

The ‘load optimized defaults’ might go through and force settings into an ‘optimized default’ setting that’s supposed to work with any configuration hardware. But it might be different from a reset as it may just reset a subset of only those settings that are exposed to a user in the BIOS screens. Resetting CMOS forces all of the CMOS ‘pigeon holes’ into an as-new state which has to be a default since it’s the same state it would be in if it were just manufactured and never powered on before, with only the first BIOS upload having been performed. So I suggest to always do a CMOS reset after hardware change or BIOS update and then do a ‘Load Optimized Defaults’ too.

The strange thing to me is sometimes you also have to pull the battery to get CMOS to fully reset to a pristine, first power-on, configuration. Not sure why that is and it’s seemed to only come about with the AM4 platform.

Video to fix bios has been reset: